China OEM RF CIU Suppliers – Silver Electrolytic Copper Expulsion Fuse – Holley

今すぐ連絡する

製品詳細

製品タグ

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for猫-M1メーター, 三相メーター, パワーメーター, We always regard the technology and customers as the uppermost. We always work hard to create great values for our customers and offer our customers better products & services.

China OEM RF CIU Suppliers –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:

仕様

	製品種類		EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470mm 沿面距離	EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE	EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE
いいえ。	特長	単位	値	値	値
1	ベース
	モデル		HV1-27/100-8	HV1-38/100-5	HV1-27/200-7.1
	標準		ANSI/IEEE C 37.40/41/42 IEC60282- 2:2008	ANSI C-37.40/41/42 and IEC60282-2	ANSI/IEEE C37.40/41/42 y IEC60282-2:2008
	定格電流	A	100	100	200
	定格電圧	kV	27	38	27
	Minimum Short Circuit Current
	-対称	kA	8	5	7.1
	-非対称	kA	12	8	10
	最小分離レベル:
	- Impulse withstand voltage (BIL), phase to ground and between phases.	kV	150	170	150
	- Withstand voltage at power frequency between phases, dry, 1 min.	kV	60	80	60
	- Withstand voltage at power frequency between phase and ground, in wet, 10s.	kV	50	70	50
	Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers.		はい	はい	はい
	Minimum creepage distance (Phase-Earth)	mm	470	660	432
	接点材質		Silver electrolytic copper	Silver electrolytic copper	Silver electrolytic copper
	- Minimum thickness of the top contact silver layer (tab)	μm	15	15	15
	- Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact	オーム	0.000099	0.000099	0.000099
	- Upper contact pressure spring with fastening and alignment mechanism		Stainless steel, grade 304 according to AISI 304, DIN 1.4301	Stainless steel, grade 304 according to AISI 304, DIN 1.4301	Stainless steel according to AISI 304, DIN 1.4301
	端子材質		錫メッキ銅	錫メッキ銅	錫メッキ銅
	-Conductor Range (Diameter)	mm	4.11-11.35	4.11-11.35	4.11-11.35
	-Terminals for use with copper or aluminum conductors		はい	はい	はい
	-端子の種類		Parallel slots, must include bolt, nuts and pressure washers made of stainless steel	Parallel slots, must include bolt, nuts and pressure washers made of stainless steel	Parallel slots, must include bolt, nuts and pressure washers made of stainless steel
	Top support channel material		Galvanized structural steel	Galvanized structural steel	Galvanized structural steel
	- Galvanized Material Standard		ASTM A575	ASTM A575	ASTM A575
	-亜鉛メッキ標準		ASTM A153	ASTM A153	ASTM A153
	- Minimum average thickness	μm	86	86	86
	最小開き角度		120°	120°	120°
	Minimum number of mechanical operations guaranteed	いいえ。	200	200	200
	Minimum mechanical resistance of the horn for load operation	くそー	200	200	200
	Dimensions (See Figure 1)
	L	mm	704	842	704
	M	mm	409	431	409
	N	mm	476	567	476
	P	mm	72	82	72
	Q	mm	131	147	131
2	ヒューズホルダーチューブ
	特長
	-標準		ANSI/IEEE C 37.40/41/42	ANSI/IEEE C 37.40/41/42	ANSI/IEEE C 37.40/41/42
	-定格電圧	kV	27	38	27
	-定格電流	A	100	100	200
	- Minimum symmetrical/asymmetrical short-circuit current	kA	8/12	5/8	7.1/10
	- Internal diameter range
	-最低限の	mm	11.1	11.1	17.5
	-最大値	mm	18	18	23
	- Length (allowable range)	mm	375±3	466±3	375±3
	- Metal parts of joining with the base		キャストブロンズ	キャストブロンズ	キャストブロンズ
	- Fuse holder tube cover (top contact)		Silver electrolytic copper, with a minimum thickness of 8 um	Silver electrolytic copper, with a minimum thickness of 8 µm	Silver electrolytic copper, with a minimum thickness of 8 µm
	- Eye hook for pole operation		Cast Bronze, with minimum mechanical resistance of 200daN	Cast Bronze, with minimum mechanical resistance of 200daN	Cast Bronze, with minimum mechanical resistance of 200daN
	- Fuse holder tube material.		Fiberglass with internal coating in moisture-proof vulcanized fiber	Fiberglass with internal coating in moisture-proof vulcanized fiber	Fiberglass with internal coating in moisture-proof vulcanized fiber
	- Fuse holder opening and closing mechanism (fuse holder base)		to avoid fuse holder tube un-alignment greater than 15mm	to avoid holder tube un-alignment no more than 15mm	to avoid fuse holder tube un-alignment no more than 15mm
	Suitable for chicote fuses with removable head (Arc shortening rod)		はい	はい	はい
3	固定用アクセサリ
	-固定の種類		Type B, according to ANSI/IEEE C37.42	Type B, according to ANSI/IEEE C37.42	Type B, according to ANSI/IEEE C37.42
	-材質		亜鉛メッキ鋼	亜鉛メッキ鋼	亜鉛メッキ鋼
	-材質規格		ASTM A575	ASTM A575	ASTM A575
	-亜鉛メッキ標準		ASTM A153	ASTM A153	ASTM A153
	- Minimum average thickness	μm	86	86	86