OEM Famous Vending Quotes –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
仕様
製品 種類 |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470mm 沿面距離 | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
いいえ。 | 特長 | 単位 | 値 | 値 | 値 |
1 | ベース |
| |||
| モデル | HV1-27/100-8 | HV1-38/100-5 | HV1-27/200-7.1 | ||
| 標準 | ANSI/IEEE C 37.40/41/42 IEC60282- 2:2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
| 定格電流 | A | 100 | 100 | 200 | |
| 定格電圧 | kV | 27 | 38 | 27 | |
| Minimum Short Circuit Current | |||||
| -対称 | kA | 8 | 5 | 7.1 | |
| -非対称 | kA | 12 | 8 | 10 | |
| 最小分離レベル: | |||||
| - Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
| - Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
| - Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
| Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | はい | はい | はい | ||
| Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
| 接点材質 | 銀電解銅 | 銀電解銅 | 銀電解銅 | ||
| - Minimum thickness of the top contact silver layer (tab) | μm | 15 | 15 | 15 | |
| - Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | オーム | 0.000099 | 0.000099 | 0.000099 | |
| - Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
| 端子材質 | 錫メッキ銅 | 錫メッキ銅 | 錫メッキ銅 | ||
| -Conductor Range (Diameter) | mm | 4.11-11.35 | 4.11-11.35 | 4.11-11.35 | |
| -Terminals for use with copper or aluminum conductors | はい | はい | はい | ||
| -端子の種類 | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
| Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
| - Galvanized Material Standard | ASTM A575 | ASTM A575 | ASTM A575 | ||
| -亜鉛メッキ標準 | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 | |
| 最小開き角度 | 120° | 120° | 120° | ||
| Minimum number of mechanical operations guaranteed | いいえ。 | 200 | 200 | 200 | |
| Minimum mechanical resistance of the horn for load operation | くそー | 200 | 200 | 200 | |
| 寸法 (図 1 を参照) | |||||
| L | mm | 704 | 842 | 704 | |
| M | mm | 409 | 431 | 409 | |
| N | mm | 476 | 567 | 476 | |
| P | mm | 72 | 82 | 72 | |
| Q | mm | 131 | 147 | 131 | |
2 | ヒューズホルダーチューブ | ||||
| 特長 | |||||
| -標準 | ANSI/IEEE C 37.40/41/42 | ANSI/IEEE C 37.40/41/42 | ANSI/IEEE C 37.40/41/42 | ||
| -定格電圧 | kV | 27 | 38 | 27 | |
| -定格電流 | A | 100 | 100 | 200 | |
| - Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7.1/10 | |
| -内径範囲 | |||||
| -最低限の | mm | 11.1 | 11.1 | 17.5 | |
| -最大値 | mm | 18 | 18 | 23 | |
| -長さ（許容範囲） | mm | 375±3 | 466±3 | 375±3 | |
| - Metal parts of joining with the base | キャストブロンズ | キャストブロンズ | キャストブロンズ | ||
| - Fuse holder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
| - Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
| - Fuse holder tube material. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
| - Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
| Suitable for chicote fuses with removable head (Arc shortening rod) | はい | はい | はい | ||
3 | 固定用アクセサリ | ||||
| -固定の種類 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
| -材質 | 亜鉛メッキ鋼 | 亜鉛メッキ鋼 | 亜鉛メッキ鋼 | ||
| -材質規格 | ASTM A575 | ASTM A575 | ASTM A575 | ||
| -亜鉛メッキ標準 | ASTM A153 | ASTM A153 | ASTM A153 | ||
| - Minimum average thickness | μm | 86 | 86 | 86 |
製品詳細写真:
関連製品ガイド:
The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations forOEM Famous Vending Quotes –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Guyana, moldova, Algeria, Many years of work experience, we have now realized the importance of providing good quality products and solutions and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
